Frequently asked questions about Rubaroc safety surfacing products

WHAT IS RUBAROC WET POUR?

Our specialist Rubaroc Wet Pour product is an ideal surface where slipping is a problem to the workforce or the general public. Rubaroc is made from hard wearing rubber granular chips which is mixed with a binding agent. This creates a seamless, porous and flexible finish, which is both impact absorbent and slip resistant – whether the floor is wet or dry! These combinations of features make Rubaroc Wet Pour ideally suited to a wide range of applications both inside and out.

Where can Rubaroc Wet Pour be used?

Rubaroc is ideally suited for a wide range of applications inside and out.

  • Swimming pools surrounds
  • Golf club walkways
  • Buggy paths
  • Ramps
  • Children’s play areas

Rubaroc Wet Pour can be laid on to any stable sub surface i.e.

  • Concrete
  • Tiles
  • Asphalt
  • Wood
  • Stone
  • Brick
  • Steel

Rubaroc Wet Pour is not effected by adverse weather conditions and is therefore highly suitable for outside applications.

Who can fit Rubaroc Wet Pour?

We recommend that Rubaroc Wet Pour only be installed by our trained fitters.

How is Rubaroc Wet Pour installed?

Rubaroc Wet Pour is poured into place and then trowelled to produce a smooth, seamless finish.

How long does Rubaroc Wet Pour take to dry?

Rubaroc Wet Pour requires 24 hours to set, after this time the surface is ready to be used.

What colours is Rubaroc Wet Pour available in?

Rubaroc Wet Pour is available in a variety of colours that are premixed which can be blended to match or compliment an existing or new colour scheme. Please contact us if you would like us to send you a colour sample.

Is Rubarcoc Wet Pour anti bacterial?

Rubaroc Wet Pour does not promote bacteria or fungus.

How should Rubaroc Wet Pour be cleaned?

The surface can be maintained and cleaning methods very from the use of a hose pipe and soft brush to pressure washing if desired.

For difficult stains, specialised cleaning materials are available.

WHAT IS RUBAPAVE?

Our specialist Rubapave product is an ideal surface where slipping is a problem to the general public. Rubapave is made from hard wearing rubber granular chips which use is mixed with a binding agent. This creates a seamless, porous and flexible finish, which is both impact absorbent and slip resistant – whether the floor is wet or dry! These features combined make Rubapave ideally suited to a wide range of external applications.

Where can Rubapave be used?

Rubaroc is ideally suited for a wide range of applications.

  • Golf club walkways
  • Buggy paths
  • Standing areas

Rubapave can be laid on to any stable sub surface i.e.

  • Concrete
  • Tiles
  • Asphalt
  • Wood
  • Stone
  • Brick
  • Steel

Rubapave is not effected by adverse weather conditions and is therefore highly suitable for external applications.

Who can fit Rubapave?

We recommend that Rubapave only be installed by our trained fitters.

How is Rubapave installed?

Rubapave is poured into place then trowelled.

How long does Rubapave take to dry?

Rubapave requires 24 hours to set, after this time the surface is ready to be used.

What colours is Rubapave available in?

Rubapave is made up of re-cycled rubber chips and aggregate, available in a wide range of colours.

Is Rubapave anti bacterial?

Rubapave does not promote bacteria or fungus.

How should Rubapave be cleaned?

The surface can be maintained and cleaning methods very from the use of a hose pipe and soft brush to pressure washing if desired.